Tools &
Accessories
Charging Kit • Gas Valves • Clamps & Brackets • Tools
Accumulator Pre-charging Kits
RGA-100-X
Bladder Accumulator Charging Kit, 100-3000 PSI, 10FT Parker Hose, Optional High-Quality Aluminum Case
The RGA-100-X series Charging and Gauging Assembly from Reasontek are standard tools for maintaining the Nitrogen pre-charge in hydro-pneumatic accumulators.
Gauges are available in different pressure ranges up to 3000 PSI.
Gauges are available in different pressure ranges up to 3000 PSI.
Features:
- Easy to install and operate
- No external leakage
- All hardware included, replaceable
- High quality materials, made in the USA.
- 10′ Parker hose with standard right-hand thread nitrogen fitting (CGA-580)
- Reusable cable ties for easy compact storage
- High quality aluminum case for protection and east carry, optional
SPEcifications:
- Pressure: 100 - 3000 PSI
- Gas Bottle Connection: Standard CGA580 *
- Gas Valve Charging Connection: Schrader type,0.305-32 UNS
- * CGA580 is the standard Nitrogen gas bottle connection in US. Some countries may have different connections, check well before purchase.
quick order
RGA-200-X
Diaphragm Accumulators Charging Kit, 100-3000 PSI FPU-25, 10 FT, Optional High Quality Aluminum Case
The RGA-200 series Charging and Gauging Assembly from Reasontek are standard tools for maintaining the Nitrogen pre-charge in hydro-pneumatic accumulators. This is the same type of Hydac’s FPU-25 with US cylinder bottle connection. Maximum pressure is up to 40MPa.
Gauges are available in different pressure ranges up to 3000 PSI.
Features:
- Easy to install and operate
- No external leakage
- Maximum versatility, up to 40MPa
- All hardware included, US type fittings, ready to connect
- High quality aluminum case for protection and east carry, optional
SPEcifications:
- Pressure: 100 - 3000 PSI
- Gas Bottle Connection: Standard CGA580 *
- Gas Valve Charging Connection: M28X1.5
- * CGA580 is the standard Nitrogen gas bottle connection in US. Some countries may have different connections, check well before purchase.
quick order
Protect your tools with our high-quality aluminum tool case.
Aluminum tool case provides the best protection on your tool sets with its durable design and materials.
No worry about the broken parts due to fragility under lifetime and weather conditions, or careless operation. Keep it longer and save cost for replacement.
No worry about the broken parts due to fragility under lifetime and weather conditions, or careless operation. Keep it longer and save cost for replacement.
Accumulator Clamps & Brackets
RMS-, RMD-, RBB-
Our accumulator mounting clamps and brackets are designed to provide simple and secure mounting for accumulators, cylinders and filter housings. Download the catalog to select the right sizes.
Features:
- Rubber cushioning to reduce vibration and noise
- Compensation for thermal expansion and contraction
- Exclusively designed for all types of accumulators, cylinders and filter housings
- Glossy plated paint to resist corrosion
- Special sizes, designs and materials (including stainless steel) available upon request
SPEcifications:
- RMS Single Bolt Clamps, RMD Double Bolt Clamps, Diameter Sizes from 4.5” to 14.1”
- RBB Base Brackets with Rubber Rings, Diameter Sizes from 4.5” to 8.1”
- Material: Carbon Steel, Stainless Steel
quick order
Accumulator Gas Valves
High quality Schrader type gas valves for accumulator charging, up to 10,000 PSI, made in US.
| Seal Type | Valve Core (up to 4,000 psi); Metal Seal, Military Type (up to 10,000 psi) |
|---|---|
|
Gas End Connection |
Schrader Type, 0.305"-32 |
|
Accumulator End Connection |
1/8" NPT; SAE#3 (3/8"-12 UNF); SAE#5 (1/2"-20 UNF) |
|
Pressure |
3,000 PSI; 4,000 PSI; 5,000 PSI; 6,500 PSI; 10,000 PSI |
quick order
Maintenance Tools & Accessories
Accumulator Repair & Maintenance Tools
- Bladder Pulling Rods (1-15 gallons)
- Spanner Wrench
- Charging & Gauging Adapters
- Pressure Gauges
- Valve core Tools
quick order
Accumulator Service Kit, RMK-100 (13pcs)
- Charging Hose Assembly, 10FT Parker, CGA-580, 1pc
- Charging & Gauging Adapter Assembly, 1pc
- Bladder Pulling Rods (1-15 gallons), 4pcs
- Bladder Pulling Rod Adaptor, 1pc
- Spanner Wrench, 1pc
- Pressure Gauge, Low, 1pc
- Valve Core Driver, 1pc
- Valve Core, 3000 PSI, 2pcs
- Gas Valve, 3000PSI, 1pc
Accumulator, Gas Bottle Shells
Accumulator shells are available for all major imperial and metric sizes with both carbon steel and stainless steel materials.
Shells supplied are ASME certified per ASME’s Boiler and Pressure Vessel Code (BPVC Section VIII, Div. I, with U STAMPED. Other international certifications are available by request.
Our accumulator shells are the world’s best quality products, which have been widely used by most top brand US manufacturers.
Our accumulator shells are the world’s best quality products, which have been widely used by most top brand US manufacturers.
- Cr-Mo High Strength Alloy Steel SA372, Stainless Steel
- ASME Coded with U Stamp, NB Registered; CE Certified and Stamped
- Epoxy, Nickel Coating Options
- Standard and Special Custom Sizes by Request
- Seamless High Pressure up to 10,000PSI
1,690 total views, 3 views today
